During the summer 2007 was a scrubber tested at Gruvön papper mill in Grums. The scrubber reduced NOx with 90 % in flue gas. NOx was transferred from the flue gas to a scrubber liquid as nitrate and nitrite. The scrubber liquid needs to be purified from nitrate and nitrite. One possible solution is to clean the scrubber liquid in Gruvön biologic cleaning construction.Microorganisms in the biologic cleaning construction need to assimilate nitrogen. There are environments free from oxygen in the cleaning construction.

Today's global market means that raw materials are sought and bought from all over the world. This creates an higher demand for a well-functioning supply chain. In our thesis we have studied a large paper mill in northen Sweden which experiences issues with flow of raw material. Our aim has hence been to examine which aspects affect the flow of raw materials to the mill, and how these can be adressed using an IT-system. The question we sought to answer was; What factors are important to consider and how do these affect the ability of an IT-system which will support the flow of raw material at the paper mill? We have found that the problems are strongly connected to the low amount of information sharing between the mill and the suppliers.

Som grafisk designer jobbar man med att förmedla budskap via exempelvis affischer, tidningar och broschyrer. En del av designprocessen är att välja vilket papper som ska användas vid tryckningen. För att kunna välja ett papper som främjar budskapet måste det först finnas förståelse för hur människor uppfattar olika sorters papper och vilken påverkan papperet har på människors tolkning av budskapet.Detta arbete visar genom research och undersökningar vissa generella uppfattningar och åsikter som finns om papper. De huvudsakliga faktorerna som inverkar på hur ett papper uppfattas är papperets tjocklek, struktur och yta. Arbetet visar även att papperet är en del av budskapet, då ett tryckt budskap inte kan skiljas från det papper det är tryckt på.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

Kräppat pappers kraft och töjningskurva är mer dragstyv till 5 % töjning för att sedan bli mindre dragstyv. Vid tillverkningens kräppningsprocess veckas pappret det borde göra det mindre dragstyvt i början av kraft och töjningskurvan för att sedan bli mer dragstyv när fiber ? fiber ? bindningarna tar upp last. För att få mer förståelse för fibrerna kontra kräppningens betydelse för kräppats pappers materialegenskaper, har en jämförelse mellan kräppat och okräppat papper gjorts.Arbetet har genomförts genom att observera kräppat papper och okräppat papper i en dragprovare under tiden har det spelats in av en usb ? mikroskops - kamera.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2014:02.

I detta examensarbete har materialet papper och dess egenskaper utforskats ur ett designperspektiv. Genom att vika, rulla och forma olika typer av papper har flera uttryck skapats. Utifrån olika byggstenar som till exempel kuber och stavar har artefakter som örhängen och korgar tagit form. Noggrann dokumentation av den experimentella processen ger ett mervärde i form av att läsaren kan upprepa och inspireras av artefakterna som skapats. Detta examensarbete syftar att måla upp en bild av papprets breda användningsområde i ett designsammanhang.

Detta examensarbete har utförts på papperstillverkaren Arjo Wiggins? forskningscenter i Beaconsfield,England. Företaget har planer på att börja tillverka en ny papperskvalitet för bläckstråleskrivare, varförsyftet med arbetet har varit att testa och utvärdera olika sammansättningar av kemikalier som lämparsig för bestrykning av bläckstrålepapper.Ett stort antal bestrykningar har testats med varierande resultat. Det svåraste har visat sig vara attnå en tillräckligt hög grad av vattenhållfasthet. Resultaten förbättrades något då baspapperetbyttes från ett limmat och kalandrerat papper till ett olimmat, okalandrerat papper.

This paper is a case study on Bradley E. Manning, famous for leaking classified intelligence to media, or in the charge sheet?s words: ?knowingly give intelligence to the enemy, through indirect means.? My opinion is that this sort of dilemma is a question of values, how you view the world and, most important of all, human rights and the philosophy of rights. Therefore I decided to sort out the arguments regarding the issue of freedom of speech versus the state?s need for protection.

This study was made for the round wood transport company MT Transport AB. Time studies were made in order to analyze time consumption on the mill site for timber trucks delivering round wood at the Södra Cell Mörrum mill. The most interesting was to see how much of the time spent at the factory that was waiting time. In three weeks the study was going on and the drivers were clocking it themselves..

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

This research project is based on observing and Analyzing the Role of a textile merchandiser in managing the supply chain of the Home Textiles In The Buying or retailing, in the Mill and with the Agents. The project also "highlights the comparative analysis of the practices by Followed merchandisers into the retailer side, mills and Those In The Agents', on the basis of the Functions Which Supports the supply chain. In the discussion, We Have highlighted Importance Of The Role Played by an agent and by the merchandisers of Buyer and Supplier in Different situation. By our research work we find out The Challenges face by merchandisers And Then we come up with sometime suggestions.This Research Project Has Been Developed by Contacting and Visiting Hemtex, Brink Textiles, by interviewing the merchandisers working in the Industries like Al-Abid Silk Mill . By Analyzing the data & the data through the visits and the interviews, this Research Project Has Been Combined to give in-depth knowledge about the Activities Which merchandisers performer in a mill and into buying a house..

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

Nordic Paper Åmotfors tillverkar elektrotekniskt papper som används till att isolera lindningarna i transformatorer. Det är viktigt att bibehålla papprets egenskaper under en mycket lång tid då en transformators livlängd är lång. Syftet med detta examensarbete var att undersöka huruvida tillsats av en kemikalie bestående av dicyandiamid kan fördröja åldrandet av de papper som Nordic Paper tillverkar. Förhoppningen var att deras papper därefter skulle klara de krav-parametrar som finns för papper som åldrats i olja. Kemikalien som användes var Cartafix® WE liquid.Försök utfördes där olika kemikaliedoseringar tillsattes i mälden.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.